Difference between revisions of "Siemens MM8000"
From Zenitel Wiki
(Created page with "==Introduction== The integration between Siemens MM8000 and the AlphaCom is OPC based. ==Licensing== As the software is based on the STENTOFON OPC server, the relevant license m...") |
(→Licensing) |
||
Line 3: | Line 3: | ||
==Licensing== | ==Licensing== | ||
− | As the software is based on the STENTOFON OPC server, the relevant license must be available in the AlphaCom. Several licenses are available depending on the number of intercom stations which are connected to the system. | + | As the software is based on the STENTOFON [[OPC server]], the relevant license must be available in the AlphaCom. Several licenses are available depending on the number of intercom stations which are connected to the system. |
* 1009649901 : STENTOFON API License Supporting 40 Stations | * 1009649901 : STENTOFON API License Supporting 40 Stations | ||
* 1009649902 : STENTOFON API License Supporting 80 Stations | * 1009649902 : STENTOFON API License Supporting 80 Stations |
Revision as of 12:27, 16 December 2014
Introduction
The integration between Siemens MM8000 and the AlphaCom is OPC based.
Licensing
As the software is based on the STENTOFON OPC server, the relevant license must be available in the AlphaCom. Several licenses are available depending on the number of intercom stations which are connected to the system.
- 1009649901 : STENTOFON API License Supporting 40 Stations
- 1009649902 : STENTOFON API License Supporting 80 Stations
- 1009649903 : STENTOFON API License Supporting 160 Stations
- 1009649904 : STENTOFON API License Supporting 240 Stations
- 1009649905 : STENTOFON API License Supporting 320 Stations
- 1009649906 : STENTOFON API License Supporting 400 Stations
- 1009649907 : STENTOFON API License Supporting 552 Stations
Note that in an AlphaNet each AlphaCom must have its own licenses.
The OPC server software itself is available from the AlphaWiki Downloads page.
AlphaCom XE configuration
The OPC server communicates with AlphaCom TCP/IP port 61112 or 61113. In AlpaWeb, make certain that the TCP/IP port which will be used is enabled in the 'Filter-page' for the physical Ethernet port (ETH0 or ETH1) which is used to communicate with the OPC server.