TCAS Connections: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 18: | Line 18: | ||
:1. Connect the RJ-45 port on the station to the AlphaCom exchange | :1. Connect the RJ-45 port on the station to the AlphaCom exchange | ||
:2. Register the station in the AlphaCom exchange | :2. Register the station in the AlphaCom exchange | ||
<br style="clear:both;" /> | |||
==Second Call Key== | |||
The station is prepared for a future second call key (DAK2). | |||
This second call key can be found on the print if wanted and utilized with an external call button. | |||
[[File:TCAS Connections 2.PNG|thumb|left|500px]] | |||
<br style="clear:both;" /> | |||
* A second external call key must be connected between the A-wire and the lower leg on D6 (highlighted in the image above). | |||
[[Category: Turbine]] | [[Category: Turbine]] | ||
Revision as of 14:10, 2 July 2013
This article describers all Turbine Compact Analog Standard Station connections.
The Turbine analog station has an RJ-45 port and 6 external connectors.
| Power | Draws power from AlphaCom signal line |
| RJ-45 port | AlphaCom connection |
| A, B, C, D wires | AlphaCom connection when RJ-45 port is not used |
Note! Use cables crimped with ferrules for terminal block connectors
To set up the analog station as an intercom:
- 1. Connect the RJ-45 port on the station to the AlphaCom exchange
- 2. Register the station in the AlphaCom exchange
Second Call Key
The station is prepared for a future second call key (DAK2).
This second call key can be found on the print if wanted and utilized with an external call button.
- A second external call key must be connected between the A-wire and the lower leg on D6 (highlighted in the image above).