TCIx Connections: Difference between revisions
From Zenitel Wiki
(Created page with "right This article describers all Turbine Compact IP Standard Station connections. The Turbine Compact IP station has a RJ-45 PoE/LAN port, and 6...") |
No edit summary |
||
| Line 21: | Line 21: | ||
* To make the station speak its IP address, press the call button on the station. | * To make the station speak its IP address, press the call button on the station. | ||
[[File:TCIS Connections 2.PNG]] | [[File:TCIS Connections 2.PNG]] | ||
<br style="clear:both;" /> | |||
=PCB - Front= | |||
[[File:TCIS Connections 3.PNG]] | |||
<br style="clear:both;" /> | |||
[[File:TCIS Connections 4.PNG|thumb|700px]] | |||
'''P1''' RJ45 PoE port for 10/100 Mbit Ethernet connection. | |||
:The station can be powered from this port if the line supports Power over Ethernet (PoE). | |||
<br style="clear:both;" /> | |||
[[File:TCIS Connections 5.PNG|thumb|700px]] | |||
'''P2'''6-pin plug-on terminal for external connections. | |||
:Pin 1/2 24 VDC for external secondary power if PoE is not used. Pin 1 is positive. | |||
:Pin 3 COM relay | |||
:Pin 4 NO relay | |||
:Pin 5 NC relay | |||
<br style="clear:both;" /> | |||
[[File:TCIS Connections 6.PNG|thumb|700px]] | |||
'''P3''' 10-pin plug-on terminal for external connections. | |||
:Pin 1 5.3V | |||
:Pin 2 GND | |||
:Pin 3 Button Input or LED Driver | |||
:Pin 4 Button Input or LED Driver | |||
:Pin 5 Button Input or LED Driver | |||
:Pin 6 Button Input or LED Driver | |||
:Pin 7 Button Input or LED Driver | |||
:Pin 8 Button Input or LED Driver | |||
:Pin 9 600 ohm balanced line out + | |||
:Pin 10 600 ohm balanced line out -1 | |||
<br style="clear:both;" /> | |||
[[File:TCIS Connections 7.PNG|thumb|700px]] | |||
'''P4''' Loudspeaker & Electret microphone | |||
:Pin 1 10W Speaker amplifier + | |||
:Pin 2 10W Speaker amplifier - | |||
:Pin 3 Electret Microphone + | |||
:Pin 4 Electret Microphone - | |||
=PCB - Rear= | |||
[[File:TCIS Connections 8.PNG]] | |||
[[File:TCIS Connections 9.PNG|thumb|700px]] | |||
'''J6''' 10-pin terminal for digital MEMS Microphone | |||
:Pin 1 Left mic select (Vdd) | |||
:Pin 2 Right mic select (GND) | |||
:Pin 3 Data | |||
:Pin 4 Data | |||
:Pin 5 Vdd 3.3V | |||
:Pin 6 Vdd 3.3V | |||
:Pin 7 CLK | |||
:Pin 8 CLK | |||
:Pin 9 GND | |||
:Pin 10 GND | |||
<br style="clear:both;" /> | |||
=Front Board - Front= | |||
[[File:TCIS Connections 10.PNG]] | |||
<br style="clear:both;" /> | |||
=Front Board - Rear= | |||
[[File:TCIS Connections 11.PNG]] | |||
<br style="clear:both;" /> | |||
[[Category: Turbine]] | [[Category: Turbine]] | ||
Revision as of 16:19, 9 October 2012
This article describers all Turbine Compact IP Standard Station connections.
The Turbine Compact IP station has a RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.
| Ethernet/Power | 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| Secondary Power | 24 VDC (16 – 48 V) secondary power is provided from an external adapter. |
| Relays | There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W. |
| Input/Output | 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
| Audio Line Out | A balanced 600 ohm audio line out with induction loop signal |
Note! Use cables crimped with ferrules for terminal block connectors
- When the Turbine Station is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
- To make the station speak its IP address, press the call button on the station.
PCB - Front
P1 RJ45 PoE port for 10/100 Mbit Ethernet connection.
- The station can be powered from this port if the line supports Power over Ethernet (PoE).
P26-pin plug-on terminal for external connections.
- Pin 1/2 24 VDC for external secondary power if PoE is not used. Pin 1 is positive.
- Pin 3 COM relay
- Pin 4 NO relay
- Pin 5 NC relay
P3 10-pin plug-on terminal for external connections.
- Pin 1 5.3V
- Pin 2 GND
- Pin 3 Button Input or LED Driver
- Pin 4 Button Input or LED Driver
- Pin 5 Button Input or LED Driver
- Pin 6 Button Input or LED Driver
- Pin 7 Button Input or LED Driver
- Pin 8 Button Input or LED Driver
- Pin 9 600 ohm balanced line out +
- Pin 10 600 ohm balanced line out -1
P4 Loudspeaker & Electret microphone
- Pin 1 10W Speaker amplifier +
- Pin 2 10W Speaker amplifier -
- Pin 3 Electret Microphone +
- Pin 4 Electret Microphone -
PCB - Rear
J6 10-pin terminal for digital MEMS Microphone
- Pin 1 Left mic select (Vdd)
- Pin 2 Right mic select (GND)
- Pin 3 Data
- Pin 4 Data
- Pin 5 Vdd 3.3V
- Pin 6 Vdd 3.3V
- Pin 7 CLK
- Pin 8 CLK
- Pin 9 GND
- Pin 10 GND
Front Board - Front
Front Board - Rear
