Difference between revisions of "2-2c. CCTV with data (1) - Event Handler (practice)"
From Zenitel Wiki
Line 2: | Line 2: | ||
'''Station numbers & names:''' | '''Station numbers & names:''' | ||
− | * | + | * 302: Entrance |
− | * | + | *104: Elevator |
*103: Gate 2 | *103: Gate 2 | ||
− | * | + | *400: main Guard |
− | * | + | *416: Reception |
'''CCTV Control:''' | '''CCTV Control:''' | ||
− | *The Entrance makes a Call Request to Guard | + | *The Entrance makes a Call Request (623) to Main Guard. Elevator and Gate 2 make a Call Request to the Reception. |
− | *When a Call Request is activated the Video Switch should receive ASCII characters telling which camera to connect to which monitor. The output should be on the format: “CxMy CR LF”. (Example: C3M2CRLF, Connect camera 3 to monitor 2, CR=Carriage Return, LF=Line Feed. Use | + | *When a Call Request is activated the Video Switch should receive ASCII characters (EDO) telling which camera to connect to which monitor. The output should be on the format: “CxMy CR LF”. (Example: C3M2CRLF, Connect camera 3 to monitor 2, CR=Carriage Return, LF=Line Feed. Use "Putty" to verify) |
[[Category: AlphaCom practice]] | [[Category: AlphaCom practice]] |
Revision as of 08:53, 17 September 2013
Station numbers & names:
- 302: Entrance
- 104: Elevator
- 103: Gate 2
- 400: main Guard
- 416: Reception
CCTV Control:
- The Entrance makes a Call Request (623) to Main Guard. Elevator and Gate 2 make a Call Request to the Reception.
- When a Call Request is activated the Video Switch should receive ASCII characters (EDO) telling which camera to connect to which monitor. The output should be on the format: “CxMy CR LF”. (Example: C3M2CRLF, Connect camera 3 to monitor 2, CR=Carriage Return, LF=Line Feed. Use "Putty" to verify)