Difference between revisions of "2-2b. CCTV with relay - Event Handler (solution)"
From Zenitel Wiki
(→Relay control. Alternative solution) |
|||
Line 57: | Line 57: | ||
When the Control Room station returns to idle, the outputs should go off: | When the Control Room station returns to idle, the outputs should go off: | ||
[[File:2-2b solution10.PNG|left|thumb|500px|Turn the outputs off whenever the Control Room returns to idle]] | [[File:2-2b solution10.PNG|left|thumb|500px|Turn the outputs off whenever the Control Room returns to idle]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 15:04, 20 September 2013
Solution
Call buttons:
- Pressing the call button at the Entrance or at the SOS Point should generate a call in private ringing mode to the Control Room.
Relay control
- A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation. Use the outputs 5 and 6.
- The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).
When the Control Room starts ringing (The Private Ringing mode event goes ON), and the caller is station 107, turn on RCO 5:
When the Control Room starts ringing (The Private Ringing mode event goes ON), and the caller is station 108, turn on RCO 6:
When the conversation with the Entrance ends (or the ringing times out), the station returns to idle mode. Now the event "4 - Station in Use" will go OFF:
When the conversation with the SOS Point ends (or the ringing times out), the station returns to idle mode. Now the event "4 - Station in Use" will go OFF:
Relay control. Alternative solution
This solution reduces the number of events. Instead of using one event for each substation, one can set the "When Related To" = "All", and use the IF statement to check who is calling.
Include all substations (here: Elevator and Entrance) in UDP group 1:
Action string:
IF %op(%2.dir,=,107) RCO 5 ON ENDIF IF %op(%2.dir,=,108) RCO 6 ON ENDIF
When the Control Room station returns to idle, the outputs should go off: