Difference between revisions of "TFIE Indication LEDs"
From Zenitel Wiki
(Created page with "=LEDs on Front Plate= thumb|700px '''<u>Power LED - Green</u>''' :- Steady light: Power is OK '''<u>Fault LED - Yellow</u>''' :- Steady light: Not...") |
(→LEDs on Front Plate) |
||
| Line 1: | Line 1: | ||
=LEDs on Front Plate= | =LEDs on Front Plate= | ||
| + | '''Power LED - Green:''' | ||
| + | * Steady light: Power is OK | ||
| + | '''Fault LED - Yellow:''' | ||
| + | * Steady light: Not used | ||
| + | * Flashing: Not registered/no connection to server | ||
| + | '''Call LED - Red:''' | ||
| + | * Steady light: In a conversation/call | ||
| + | |||
[[File:TFIE Indications 1.PNG|thumb|700px]] | [[File:TFIE Indications 1.PNG|thumb|700px]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
=Status LEDs on PCB= | =Status LEDs on PCB= | ||
Revision as of 12:36, 13 October 2016
LEDs on Front Plate
Power LED - Green:
- Steady light: Power is OK
Fault LED - Yellow:
- Steady light: Not used
- Flashing: Not registered/no connection to server
Call LED - Red:
- Steady light: In a conversation/call
Status LEDs on PCB
Flashing 2 red + 1 green
- - Station has no connection to the AlphaCom server/exchange.
Flashing 1 red + 2 green
- - Station connected but NOT registered in the AlphaCom server/exchange.
Flashing 3 green
- - Station connected and registered in the AlphaCom server/exchange.
Ethernet Activity & Speed LEDs on PCB
Green LED
- - Steady light: Ethernet connection OK
- - Flashing: Ethernet data traffic
- - No light: No Ethernet connection
Yellow LED
- - Steady light: 100 Mbit Ethernet connection
- - No light: 10 Mbit Ethernet connection