Difference between revisions of "IP Flush Master and Headset"
From Zenitel Wiki
| Line 1: | Line 1: | ||
{{stub}} | {{stub}} | ||
| + | [[File:IPFlush Headset2.PNG|thumb|300px|Headset connection to IP Flush Master]] | ||
This article describes how to connect headset to the [[IP Flush Master - 1008031000]] or to the [[IP Master Station Kit - 1008093000]]. | This article describes how to connect headset to the [[IP Flush Master - 1008031000]] or to the [[IP Master Station Kit - 1008093000]]. | ||
| − | |||
| − | |||
| − | The IP Flush Master station is fit with an RJ11 connector for headset connection | + | The IP Flush Master station is fit with an RJ11 connector for headset connection. Insert the RJ11 plug of the headset into the upper port of the dual RJ11 ports on the lower left of the station. A regular PC style headset can be used. If the headset is not equipped with an RJ11 connector, an adapter must be made locally. |
| − | '''Headset connections:''' | + | '''Headset connections are as follows:''' |
[[File:IP Master Board 8.PNG|left|thumb|200px|J8]] | [[File:IP Master Board 8.PNG|left|thumb|200px|J8]] | ||
*Pin 7 Mic+ | *Pin 7 Mic+ | ||
Revision as of 12:59, 6 January 2015
This article describes how to connect headset to the IP Flush Master - 1008031000 or to the IP Master Station Kit - 1008093000.
The IP Flush Master station is fit with an RJ11 connector for headset connection. Insert the RJ11 plug of the headset into the upper port of the dual RJ11 ports on the lower left of the station. A regular PC style headset can be used. If the headset is not equipped with an RJ11 connector, an adapter must be made locally.
Headset connections are as follows:
- Pin 7 Mic+
- Pin 8 Spk+
- Pin 9 Spk-
- Pin 10 Mic-
- Pin 11 PTT Ground
- Pin 12 PTT (Not currently supported by SW)
