IP Desk Connections: Difference between revisions
From Zenitel Wiki
| Line 1: | Line 1: | ||
== Introduction == | == Introduction == | ||
The table below is an overview of the main connectors involved when installing the STENTOFON IP Stations. | The table below is an overview of the main connectors involved when installing the STENTOFON IP Desktop Stations. | ||
{|border="1" | {|border="1" | ||
Revision as of 11:33, 20 October 2016
Introduction
The table below is an overview of the main connectors involved when installing the STENTOFON IP Desktop Stations.
| LAN | 10/100 Mbps RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| AUX | 10/100 Mbps RJ-45 ports for auxiliary equipment such as PC and IP camera. |
Power Supply
The IP Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.
Network Connection
There are two RJ45 ports on the IP Desk Stations:
- LAN port: for connecting to the network and the AlphaCom XE Audio Server.
- AUX port: for connecting to auxiliary equipment such as a PC or IP Camera.
