INCA Substation PCB LED Indicators: Difference between revisions
From Zenitel Wiki
| Line 4: | Line 4: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
'''Blinking 2 red + 1 green:''' | * '''Blinking 2 red + 1 green:''': Station has no connection to the AlphaCom XE Audio Server. | ||
* '''Blinking 1 red + 2 green:''': Station connected but NOT registered in the AlphaCom XE Audio Server. | |||
* '''Blinking 3 green:''': Station connected and registered in the AlphaCom XE Audio Server. | |||
'''Blinking 1 red + 2 green:''' | |||
'''Blinking 3 green:''' | |||
===LAN LEDs=== | ===LAN LEDs=== | ||
Revision as of 11:02, 26 October 2016
Status LED
Bicolor SMD LED on board component side.
- Blinking 2 red + 1 green:: Station has no connection to the AlphaCom XE Audio Server.
- Blinking 1 red + 2 green:: Station connected but NOT registered in the AlphaCom XE Audio Server.
- Blinking 3 green:: Station connected and registered in the AlphaCom XE Audio Server.
LAN LEDs
Left LED:
- Steady light: Ethernet connection OK
- Blinking: Ethernet traffic
- No light: No Ethernet connection
Right LED:
- Light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection