Difference between revisions of "Call and Relay operation by URL"
From Zenitel Wiki
Line 5: | Line 5: | ||
*Activate the relay: | *Activate the relay: | ||
− | http://10.5.2.138/goform/zForm_webcall?activate=Activate | + | <nowiki>http://10.5.2.138/goform/zForm_webcall?activate=Activate</nowiki> |
*Deactivate the relay: | *Deactivate the relay: | ||
− | http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate | + | <nowiki>http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate</nowiki> |
*Activate the relay with a timer (here 1 second): | *Activate the relay with a timer (here 1 second): | ||
− | http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1 | + | <nowiki>http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1</nowiki> |
*Activate the relay with a timer (here 20 seconds): | *Activate the relay with a timer (here 20 seconds): | ||
− | http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20< | + | <nowiki>http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20</nowiki> |
[[Category:Pulse - Features]] | [[Category:Pulse - Features]] |
Revision as of 16:08, 10 January 2017
It is possible to operate the relay on a station by an URL.
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.
- Activate the relay:
http://10.5.2.138/goform/zForm_webcall?activate=Activate
- Deactivate the relay:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
- Activate the relay with a timer (here 1 second):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1
- Activate the relay with a timer (here 20 seconds):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20