Call and Relay operation by URL

It is possible to initiate a call and to operate the relay on a station by an URL.

In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.

• Call station 10:

http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10

• Cancel the call:

http://10.5.2.138/goform/zForm_webcall?message=Stop+call

• Activate the relay:

http://10.5.2.138/goform/zForm_webcall?activate=Activate

• Deactivate the relay:

http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate

• Activate the relay with a timer (here 1 second):

http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1

• Activate the relay with a timer (here 20 seconds):

http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20