Actions

Difference between revisions of "Permanent Audio Stream"

From Zenitel Wiki

m (Limitation on TCIV added)
Line 1: Line 1:
{{APS}}
+
{{AEIPS}}
 
IP Stations can be configured two permanently transmit two RTP streams (configurable). The RTP audio will be sent to a given ipaddress/port with configured codec.
 
IP Stations can be configured two permanently transmit two RTP streams (configurable). The RTP audio will be sent to a given ipaddress/port with configured codec.
  
Line 11: Line 11:
 
<br style="clear:both;" />Tools like VS-Recorder 2.0 can be used to record the actual RTP audio.
 
<br style="clear:both;" />Tools like VS-Recorder 2.0 can be used to record the actual RTP audio.
  
<u>Note</u> that available number of Permanent Audio Streams on TCIV is decreased to 1.
+
{{Note|On TCIV the available number of Permanent Audio Streams is decreased to 1}}
 +
 
 +
[[Category: IC-EDGE Configuration]]
 
[[Category: Pulse - Configuration]]
 
[[Category: Pulse - Configuration]]
 
[[Category: SIP intercom - Configuration]]
 
[[Category: SIP intercom - Configuration]]

Revision as of 14:11, 13 September 2019

AEIPS.png

IP Stations can be configured two permanently transmit two RTP streams (configurable). The RTP audio will be sent to a given ipaddress/port with configured codec.

The configuration web page for Permanent Audio is hidden: <ipaddress>/goform/zForm_stream_config

It is possible to change the condition for enabling RTP to only be during calls.

It is also possible to make only calls created using specified DAKs enable the stream in SIP mode.

Permanent Audio configuration page


Tools like VS-Recorder 2.0 can be used to record the actual RTP audio.

Note icon On TCIV the available number of Permanent Audio Streams is decreased to 1