|
|
| Line 11: |
Line 11: |
| | | | |
| | The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program. | | The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program. |
| − |
| |
| − | == Upgrade TCIS or TKIS-2 (Turbine Compact) from version 3.0.x.x ==
| |
| − | ===Upgrade using the Web Interface of the station ===
| |
| − |
| |
| − | ====Prerequisites====
| |
| − | # A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
| |
| − | # Download the software package '''tsi-3.0.3.5.zip''', and unzip the package and store the files in a folder on your PC.
| |
| − | # Download the software package '''sti-prod-4.2.3.14.zip''', and unzip the package and store the files in a different folder on your PC.
| |
| − | # Check if your local firewall is '''not''' blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)
| |
| − |
| |
| − | ==== Upgrade procedure ====
| |
| − | The upgrade is a two-step process:
| |
| − | * First install version 3.0.3.5, then
| |
| − | * Install version 4.2.3.14
| |
| − |
| |
| − | 1. Start the TFTP server program and click '''Browse''', and select the folder where the version 3.0.3.5 software files are located
| |
| − |
| |
| − | [[File:TFTP 3035.PNG|thumb|left|500px|TFTP Server - Browse to the folder where the software files are located]]
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | 2. Log on to the Turbine Station web interface. Default login credentials are '''admin''' and '''alphaadmin'''. Select '''Station Administration''' > '''Manual Upgrade'''
| |
| − |
| |
| − | 3. Enter the IP address of the '''TFTP server''' (I.e. the IP address of your PC)
| |
| − |
| |
| − | 4. Enter the image file: '''tsi-3.0.3.5''', and click '''Save settings'''
| |
| − |
| |
| − | [[File:TurbineTo 3035.PNG|thumb|left|500px|Load '''tsi-3.0.3.5''' via the station web interface]]
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program.
| |
| − |
| |
| − |
| |
| − | When the station is up and running again, the next step is to install version 4.2.3.14:
| |
| − |
| |
| − | 5. In the TFTP server program, '''Browse''' to the folder where the version 4.2.3.14 software files are located
| |
| − |
| |
| − | 6. In the Turbine web interface enter the image file: '''tsi2sti-4.2.3.14.ipk''', and '''Save settings'''
| |
| − |
| |
| − | [[File:TurbineTo 42314.PNG|thumb|left|500px|Installing '''tsi2sti-4.2.3.14.ipk''' via the station web interface]]
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | The station will again contact the TFTP server and download and install the required files.
| |
| | | | |
| | ==Upgrade from version 3.1, 4.0, 4.1== | | ==Upgrade from version 3.1, 4.0, 4.1== |
This article describes how to upgrade the software of the ITSV-1 station via the web interface of the station.
Procedure
- Download the software file gxv3240fw_1.0.3.179.bin to your PC.
- Log on to the ITSV-1 Station web interface. Default login credentials are admin and alphaadmin
- Select Maintenance > Upgrade, and choose "Firmware Upgrade Via:" Manual Upload
- Select Upload, and browse to the gxv3240fw_1.0.3.179.bin file
Upload new software via the station web interface
The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.
Upgrade from version 3.1, 4.0, 4.1
For upgrade from version 3.1, 4.0, 4.1 see article: Upgrade Turbine stations from 3.1, 4.0 or 4.1
Troubleshooting
In the case the upgrade is not successful it may be due to a windows setting.
