TCAS Connections

This article describers all Turbine Compact Analog Standard Station connections.

The Turbine analog station has an RJ-45 port and 6 external connectors.

Power	Draws power from AlphaCom signal line
RJ-45 port	AlphaCom connection
A, B, C, D wires	AlphaCom connection when RJ-45 port is not used

Note! Use cables crimped with ferrules for terminal block connectors

To set up the analog station as an intercom:

1. Connect the RJ-45 port on the station to the AlphaCom exchange

2. Register the station in the AlphaCom exchange

For details on connection at the AlphaCom server side, see ASLT - AlphaCom Subscriber Line Board

Second Call Key

The station is prepared for a future second call key (DAK2).

This second call key can be found on the print if wanted and utilized with an external call button.

• A second external call key must be connected between the A-wire and the lower leg on D6 (highlighted in the image above).