Difference between revisions of "ENA2100 Status LEDs"
From Zenitel Wiki
| Line 7: | Line 7: | ||
* '''Power''': Steady green light when the amplifier is powered on | * '''Power''': Steady green light when the amplifier is powered on | ||
* '''Status''': When the amplifier is operational, the LED is flashing green. The LED will be steady lit during the startup sequence | * '''Status''': When the amplifier is operational, the LED is flashing green. The LED will be steady lit during the startup sequence | ||
| − | * '''Fault''': The yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See [[ENA Amplifier - Monitoring | + | * '''Fault''': The yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See [[ENA Amplifier - Monitoring]]. The Fault LED is lit during the startup sequence |
* '''Disabled''': | * '''Disabled''': | ||
* '''VU 1''': | * '''VU 1''': | ||
* '''VU 2''': | * '''VU 2''': | ||
Revision as of 13:44, 9 January 2019
The ENA2100-AC Amplifier has status LED indicators in the front panel:
- Power: Steady green light when the amplifier is powered on
- Status: When the amplifier is operational, the LED is flashing green. The LED will be steady lit during the startup sequence
- Fault: The yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See ENA Amplifier - Monitoring. The Fault LED is lit during the startup sequence
- Disabled:
- VU 1:
- VU 2: