Difference between revisions of "ENA2100 Status LEDs"
From Zenitel Wiki
| Line 11: | Line 11: | ||
* '''VU 1''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 1 | * '''VU 1''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 1 | ||
* '''VU 2''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 2 | * '''VU 2''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 2 | ||
| + | |||
| + | [[Category: Public Address - Features and configuration]] | ||
Revision as of 13:51, 9 January 2019
The ENA2100-AC Amplifier has status LED indicators in the front panel:
- Power: Steady green light when the amplifier is powered on
- Status: When the amplifier is operational, the LED is flashing green. The LED will be steady lit during the startup sequence
- Fault: The Yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See ENA Amplifier - Monitoring. The Fault LED is lit during the startup sequence
- Disabled: This Yellow LED will be lit if the loudspeaker output channels are disabled (From Web: Amplifier Settings > Line Control > Lines Enabled: Uncheck)
- VU 1: This Green and Red LED is lit when there is audio activity on loudspeaker channel 1
- VU 2: This Green and Red LED is lit when there is audio activity on loudspeaker channel 2