Device Profiles

This article described how to configure the Device Profiles in an IC-EDGE System.

The Device Profiles defines a set of features that are available for a group of stations.

The IC-EDGE system has five device profiles:

• Profile 1 - Default
• Profile 2 - Substation
• Profile 3 - Display station
• Profile 4 - Operator
• Profile 5 - Gateway

The following features are included in a device profile:

• Outgoing call restriction
• Relay activation (i.e. Door opening)
• Group Call initiation
• Busy Override

To modify device profiles select Edge Controller > Device Profiles:

Modify Device Profiles.

• Profile nickname: The name of the profile. Any text can be used.
• Outgoing calls allowed: Stations in selected profile can call stations in the checked profiles. «Forbidden» in the display if access is denied.
• Relay activation allowed: Stations in selected profile can activate the relay (e.g. Door Opening) on stations in the checked profiles.
• Group calls allowed: Stations in selected profile are allowed to dispatch the checked group calls
• Busy override allowed: When calling a busy station, stations in selected profile can force a connection by pressing digit 5. Note that function can only be used from Vingtor-Stentofon stations, including Turbine and INCA family and VS-Client. 3rd party SIP stations and ITSV-1 can't send 5 to override busy stations