Actions

Difference between revisions of "Noise Reduction feature (Edge)"

From Zenitel Wiki

(Created page with "{{E}} The '''Noise Reduction''' feature is used for intercoms located in noisy environments. The noise reduction feature filters out the background noise and at the same time...")
 
Line 10: Line 10:
 
The default value is 0 (disabled)
 
The default value is 0 (disabled)
  
A value of 1 (Turbine) / 3 or 4 (INCA) will normally give a good noise reduction, and at the same time give intelligible speech.  
+
A value of 1 (Turbine) / 3 (INCA) will normally give a good noise reduction, and at the same time give intelligible speech.  
  
 
[[Category: IC-EDGE Configuration]]
 
[[Category: IC-EDGE Configuration]]

Revision as of 13:43, 23 August 2019

Edge-icon.jpg

The Noise Reduction feature is used for intercoms located in noisy environments. The noise reduction feature filters out the background noise and at the same time keeps the voice signal.

The feature can be activated from two different places:

  • In the Edge Controller select: Edge Controller > System Configuration > Call and Audio:
NoiseCancellingEdge.png


The default value is 0 (disabled)

A value of 1 (Turbine) / 3 (INCA) will normally give a good noise reduction, and at the same time give intelligible speech.