Actions

Difference between revisions of "TCIA-2"

From Zenitel Wiki

Line 1: Line 1:
THIS PAGE IS UNDER CONSTRUCTION
 
 
The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted.
 
The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted.
  
 
The solution is baed on a TKIS-2 VoIP kit, where audio and control signals are connected to an interface (TKIA-2), before they are transported to the front unit TCIA-2.
 
The solution is baed on a TKIS-2 VoIP kit, where audio and control signals are connected to an interface (TKIA-2), before they are transported to the front unit TCIA-2.
  
{{AEPS}}[[file:TCAS2.PNG|right|200px|thumb|Analog over IP Intercom<br>(100 8113 020)]]
+
{{AEPS}}[[file:TCAS2.PNG|200px|thumb|Analog over IP Intercom<br>(1008113020)|alt=]]
== Getting started ==
+
==Getting started==
* [[TKIS Connections|General TKIS connections]]
 
* [[Starting Up Turbine Station|Starting up]]
 
  
== Connecting the devices ==
+
*[[TKIS Connections|General TKIS connections]]
 +
*[[Starting Up Turbine Station|Starting up]]
 +
 
 +
==Connecting the devices==
 
[[File:TCIA-2 Connection 1.png|thumb|right|500px]]
 
[[File:TCIA-2 Connection 1.png|thumb|right|500px]]
  
 
The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.
 
The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.
* Using the 8-wire cable, connect the pins on the TKIA-2 to the corresponding pins on the TKIS-2 according to the drawing.
+
 
 +
*Using the 8-wire cable, connect the pins on the TKIA-2 to the corresponding pins on the TKIS-2 according to the drawing.
 +
 
 
An FTP cable (maximum 60 meters) is used to connect the TKIA-2 Gateway to the TCIA-2 Intercom.
 
An FTP cable (maximum 60 meters) is used to connect the TKIA-2 Gateway to the TCIA-2 Intercom.
* Using the FTP cable, connect the RJ45 port on the TKIA-2 to the RJ45 port on the TCIA-2.
 
  
== Configuration ==
+
*Using the FTP cable, connect the RJ45 port on the TKIA-2 to the RJ45 port on the TCIA-2.
 +
 
 +
==Configuration==
 
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
 
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
* [[Turbine Configuration - AlphaCom mode|AlphaCom mode]]
 
* [[Adding station to existing system (Edge)|Edge mode]]
 
* [[SIP Intercom Configuration|SIP mode]]
 
* [[IP Station Configuration - Pulse mode|Pulse mode]]
 
  
== Restore Factory Defaults and Software Upgrade ==
+
*[[Turbine Configuration - AlphaCom mode|AlphaCom mode]]
* [[TKIS Restore Factory Defaults|Restore Factory Defaults]]
+
*[[Adding station to existing system (Edge)|Edge mode]]
* [[Turbine Software Upgrade|Upgrade via the station web interface]]
+
*[[SIP Intercom Configuration|SIP mode]]
* [[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
+
*[[IP Station Configuration - Pulse mode|Pulse mode]]
* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+
 
 +
==Restore Factory Defaults and Software Upgrade==
 +
 
 +
*[[TKIS Restore Factory Defaults|Restore Factory Defaults]]
 +
*[[Turbine Software Upgrade|Upgrade via the station web interface]]
 +
*[[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
 +
*[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
 +
 
 +
==Connectors, Indicators and Dimensions==
 +
 
 +
*[[Turbine Compact Board Connectors|Board Connections]]
 +
*[[TKIS Indication LEDs|Station Indication LEDs]]
 +
*[[TKIS Dimensions & Mounting Instructions|Dimensions]]
  
== Connectors, Indicators and Dimensions ==
+
==Accessories==
* [[Turbine Compact Board Connectors|Board Connections]]
 
* [[TKIS Indication LEDs|Station Indication LEDs]]
 
* [[TKIS Dimensions & Mounting Instructions|Dimensions]]
 
  
== Accessories ==
 
 
*[[TA-1|TA-1, Turbine Compact Onwall Box - 1008140010]]
 
*[[TA-1|TA-1, Turbine Compact Onwall Box - 1008140010]]
 
*[[TA-2|TA-2, US 2 GANG, Double Depth - 3.5”, Back Box, Masonry - 1008140020]]
 
*[[TA-2|TA-2, US 2 GANG, Double Depth - 3.5”, Back Box, Masonry - 1008140020]]
Line 41: Line 48:
 
*[[TA-14|TA-14 Microphone Windscreen - 1008140140]]
 
*[[TA-14|TA-14 Microphone Windscreen - 1008140140]]
  
== Software Requirements ==
+
==Software Requirements==
 
This station is fully supported as form AlphaCom version 11.2.3.7
 
This station is fully supported as form AlphaCom version 11.2.3.7
  
 
[[Category: Turbine]]
 
[[Category: Turbine]]

Revision as of 04:10, 19 October 2020

The TCIA-2 is an IP based intercom with an analog frontboard intended for areas where exposure of the physical network is unwanted.

The solution is baed on a TKIS-2 VoIP kit, where audio and control signals are connected to an interface (TKIA-2), before they are transported to the front unit TCIA-2.

AEPS.png
Analog over IP Intercom
(1008113020)

Getting started

Connecting the devices

TCIA-2 Connection 1.png

The 8-wire cable provided is used for connecting the TKIA-2 Gateway to the TKIS-2 Intercom. The colorcoded wires serve as a visual aid to connecting to the correct pins at both ends.

  • Using the 8-wire cable, connect the pins on the TKIA-2 to the corresponding pins on the TKIS-2 according to the drawing.

An FTP cable (maximum 60 meters) is used to connect the TKIA-2 Gateway to the TCIA-2 Intercom.

  • Using the FTP cable, connect the RJ45 port on the TKIA-2 to the RJ45 port on the TCIA-2.

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as form AlphaCom version 11.2.3.7