Difference between revisions of "Permanent Audio Stream"
From Zenitel Wiki
m (Roarl moved page Permament Audio Stream to Permanent Audio Stream) |
|||
| Line 11: | Line 11: | ||
<br style="clear:both;" />Tools like VS-Recorder 2.0 can be used to record the actual RTP audio. | <br style="clear:both;" />Tools like VS-Recorder 2.0 can be used to record the actual RTP audio. | ||
| − | {{Note| | + | {{Note|Permanent audio stream is removed on TCIV from sw 4.11, but available on TCIV+}} |
[[Category: IC-EDGE Configuration]] | [[Category: IC-EDGE Configuration]] | ||
[[Category: Pulse - Configuration]] | [[Category: Pulse - Configuration]] | ||
[[Category: SIP intercom - Configuration]] | [[Category: SIP intercom - Configuration]] | ||
Revision as of 14:50, 25 November 2020
IP Stations can be configured to permanently transmit two RTP streams (configurable). The RTP audio will be sent to a given ipaddress/port with configured codec.
The configuration web page for Permanent Audio is hidden: <ipaddress>/goform/zForm_stream_config
It is possible to change the condition for enabling RTP to only be during calls.
It is also possible to make only calls created using specified DAKs enable the stream in SIP mode.
Tools like VS-Recorder 2.0 can be used to record the actual RTP audio.
|
Permanent audio stream is removed on TCIV from sw 4.11, but available on TCIV+ |