Difference between revisions of "AlphaCom supervision of protocol converter daemons"
From Zenitel Wiki
Line 1: | Line 1: | ||
− | [[SIPD]] and [[RMD]] are connected to [[AMCD]] through local sockets using [[Stentofon Simple Link Layer]] | + | [[SIPD]] and [[RMD]] are connected to [[AMCD]] through [[local IP sockets]] using [[Stentofon Simple Link Layer]] |
*The daemon send an idle frame to [[AMCD]] every 5? second. | *The daemon send an idle frame to [[AMCD]] every 5? second. |
Revision as of 03:25, 25 May 2007
SIPD and RMD are connected to AMCD through local IP sockets using Stentofon Simple Link Layer
- The daemon send an idle frame to AMCD every 5? second.
- If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using either:
/opt/amc/script/rmd stop
or
/opt/amc/script/sipd stop
- 5 seconds later the deamon is restarted by AMCD using:
/opt/amc/script/rmd start
or
/opt/amc/script/sipd start
- If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times.