Difference between revisions of "AlphaCom supervision of protocol converter daemons"
From Zenitel Wiki
Line 1: | Line 1: | ||
− | [[SIPD]] and [[RMD]] are connected to [[AMCD]] through [[local IP sockets]] using [[Stentofon Simple Link Layer]] | + | [[SIPD]] and [[RMD]] are connected to [[AMCD]] through [[local IP sockets]] using [[Stentofon Simple Link Layer]] |
+ | |||
+ | SIPD is connected to ACDP port 31 | ||
+ | RMD is connected to ACDP port 32 | ||
*The daemon send an idle frame to [[AMCD]] every 5? second. | *The daemon send an idle frame to [[AMCD]] every 5? second. |
Revision as of 03:36, 25 May 2007
SIPD and RMD are connected to AMCD through local IP sockets using Stentofon Simple Link Layer
SIPD is connected to ACDP port 31 RMD is connected to ACDP port 32
- The daemon send an idle frame to AMCD every 5? second.
- If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using either:
/opt/amc/script/rmd stop
or
/opt/amc/script/sipd stop
- 5 seconds later the deamon is restarted by AMCD using:
/opt/amc/script/rmd start
or
/opt/amc/script/sipd start
- If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times.
Example of Syslog AlphaLog report for this sequence:
W(204.65) INFO_DP_LINK_DOWN, no:337 "" P1: 31, P2: 150, P3: 0 DP link down, port 31 node 150 device 0 W(204.65) UNEXP_SIG, no:338 "sipd start" P1: 31, P2: 0, P3: 0 W(204.65) INFO_DP_IDLE_FRAME, no:339 "" P1: 31, P2: 150, P3: 0 Peer on ACDP port 31 is node 150 device 0