Difference between revisions of "AlphaCom supervision of protocol converter daemons"
From Zenitel Wiki
Line 6: | Line 6: | ||
*The daemon send an idle frame to [[AMCD]] every 5? second. | *The daemon send an idle frame to [[AMCD]] every 5? second. | ||
− | *If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using | + | *If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using: |
− | /opt/amc/script/rmd stop | + | '''/opt/amc/script/rmd stop''' |
− | + | or | |
− | /opt/amc/script/sipd stop | + | '''/opt/amc/script/sipd stop''' |
*5 seconds later the deamon is restarted by [[AMCD]] using: | *5 seconds later the deamon is restarted by [[AMCD]] using: | ||
− | /opt/amc/script/rmd start | + | '''/opt/amc/script/rmd start''' |
− | or | + | or |
− | /opt/amc/script/sipd start | + | '''/opt/amc/script/sipd start''' |
* If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times. | * If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times. |
Revision as of 03:38, 25 May 2007
SIPD and RMD are connected to AMCD through local IP sockets using Stentofon Simple Link Layer
SIPD is connected to ACDP port 31 RMD is connected to ACDP port 32
- The daemon send an idle frame to AMCD every 5? second.
- If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using:
/opt/amc/script/rmd stop or /opt/amc/script/sipd stop
- 5 seconds later the deamon is restarted by AMCD using:
/opt/amc/script/rmd start or /opt/amc/script/sipd start
- If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times.
Example of Syslog AlphaLog report for this sequence:
W(204.65) INFO_DP_LINK_DOWN, no:337 "" P1: 31, P2: 150, P3: 0 DP link down, port 31 node 150 device 0 W(204.65) UNEXP_SIG, no:338 "sipd start" P1: 31, P2: 0, P3: 0 W(204.65) INFO_DP_IDLE_FRAME, no:339 "" P1: 31, P2: 150, P3: 0 Peer on ACDP port 31 is node 150 device 0