AlphaCom supervision of protocol converter daemons: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 23: | Line 23: | ||
W(204.65) [[ERR_DAEMON]], no:338 "sipd restart" P1: 31, P2: 0, P3: 1 | W(204.65) [[ERR_DAEMON]], no:338 "sipd restart" P1: 31, P2: 0, P3: 1 | ||
W(204.65) [[INFO_DP_IDLE_FRAME]], no:339 "" P1: 31, P2: 150, P3: 0 Peer on ACDP port 31 is node 150 device 0 | W(204.65) [[INFO_DP_IDLE_FRAME]], no:339 "" P1: 31, P2: 150, P3: 0 Peer on ACDP port 31 is node 150 device 0 | ||
{{stub}} | |||
Revision as of 05:45, 25 May 2007
The SIP and RM daemon (SIPD,RMD) are connected to AMCD through local IP sockets using the Stentofon Simple Link Layer protocol
SIPD is connected to ACDP port 31 RMD is connected to ACDP port 32
- The daemon send an idle frame to AMCD every 5? second.
- If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using:
/opt/amc/script/rmd stop
or
/opt/amc/script/sipd stop
- 5 seconds later the deamon is restarted by AMCD using:
/opt/amc/script/rmd start
or
/opt/amc/script/sipd start
- If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times.
Example of Syslog AlphaLog report for this sequence:
W(204.65) INFO_DP_LINK_DOWN, no:337 "" P1: 31, P2: 150, P3: 0 DP link down, port 31 node 150 device 0 W(204.65) ERR_DAEMON, no:338 "sipd restart" P1: 31, P2: 0, P3: 1 W(204.65) INFO_DP_IDLE_FRAME, no:339 "" P1: 31, P2: 150, P3: 0 Peer on ACDP port 31 is node 150 device 0