Difference between revisions of "AlphaCom supervision of protocol converter daemons"
From Zenitel Wiki
Line 1: | Line 1: | ||
The [[SIP]] and [[RM]] daemon ([[SIPD]],[[RMD]]) are connected to [[AMCD]] through [[local IP sockets]] using the [[Stentofon Simple Link Layer]] protocol | The [[SIP]] and [[RM]] daemon ([[SIPD]],[[RMD]]) are connected to [[AMCD]] through [[local IP sockets]] using the [[Stentofon Simple Link Layer]] protocol | ||
− | SIPD | + | SIPD connected to ACDP port 31 |
− | RMD | + | RMD connected to ACDP port 32 |
− | * | + | *Every 5 second the daemon send an idle frame to [[AMCD]]. |
*If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using: | *If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using: | ||
Line 11: | Line 11: | ||
'''/opt/amc/script/sipd stop''' | '''/opt/amc/script/sipd stop''' | ||
− | *5 seconds | + | *After 5 seconds the deamon is restarted by [[AMCD]] using: |
'''/opt/amc/script/rmd start''' | '''/opt/amc/script/rmd start''' | ||
or | or |
Revision as of 06:52, 25 May 2007
The SIP and RM daemon (SIPD,RMD) are connected to AMCD through local IP sockets using the Stentofon Simple Link Layer protocol
SIPD connected to ACDP port 31 RMD connected to ACDP port 32
- Every 5 second the daemon send an idle frame to AMCD.
- If no idle frame is received from the daemon within 30 second the daemon is terminated by AMCD using:
/opt/amc/script/rmd stop or /opt/amc/script/sipd stop
- After 5 seconds the deamon is restarted by AMCD using:
/opt/amc/script/rmd start or /opt/amc/script/sipd start
- If no new idle frame is received from the daemon within 30 second the stop/start procedure is repeated, this sequence will be repeated 5 times.
Example of Syslog AlphaLog report for this sequence:
W(204.65) INFO_DP_LINK_DOWN, no:337 "" P1: 31, P2: 150, P3: 0 DP link down, port 31 node 150 device 0 W(204.65) ERR_DAEMON, no:338 "sipd restart" P1: 31, P2: 0, P3: 1 W(204.65) INFO_DP_IDLE_FRAME, no:339 "" P1: 31, P2: 150, P3: 0 Peer on ACDP port 31 is node 150 device 0