Actions

Difference between revisions of "VR3G-1 and VR3G-1P Board Connectors"

From Zenitel Wiki
Line 7: Line 7:
 
| align="center" style="background:#ffd400;" |'''''Comment'''''
 
| align="center" style="background:#ffd400;" |'''''Comment'''''
 
|-
 
|-
−
| 1 || USB Port || Used during production process and for recovery.
+
| 1 || CPU Module || .
 
|-
 
|-
−
| 2¹ || Relay || Double Throw (SPDT) relay contact with 60W switching power. Max: 250VAC/220VDC, 2A, 60W
+
| 2 || Tamper Switch || Connected to input #4
 
|-
 
|-
−
| 3¹ || I/O interface|| 6 general purpose I/Os. Each I/O can be configured either as an input or 12mA LED driver output
+
| 3 || Relay || Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W.
 
|-
 
|-
−
| 4¹ || Line Output || Balanced 600 ohm audio line out. Suitable for external induction loop amplifier, PA amplifiers etc
+
| 4 || I/O interface || 6 general purpose I/Os. Each I/O can be configured either as an input or 12mA LED driver output
 
|-
 
|-
−
| 5¹ || Speaker Output || Connection for 8Ω external speaker (relevant for [[TKIV+]] kit)
+
| 5 || Line Output || Balanced 600 ohm audio line out. Suitable for e.g. external induction loop amplifier
 
|-
 
|-
−
| 6¹ || Microphone Input || Connection for electret microphone (relevant for [[TKIV+]] kit)
+
| 6 || Power Input || Optional 24VDC power input from external power supply
 
|-
 
|-
−
| 7¹ || Power Input || 24 VDC for external secondary power if PoE/PoE+ is not available. Pin 1 is positive.
+
| 7 || Network Port || 10/100/1000Mbps RJ-45 port connecting to Ethernet. PoE/PoE+ is supported.
−
|-
 
−
| 8 || Network Port || 10/100/1000Mbps RJ-45 port connecting to Ethernet. PoE/PoE+ is supported.
 
−
|-
 
−
| 9 || SD-card slot || SD Card slot planned for future use. Currently not in use.
 
 
|-
 
|-
 
|}
 
|}

Revision as of 15:42, 7 September 2023

VR3G Station connectors


Item Description Comment
1 CPU Module .
2 Tamper Switch Connected to input #4
3 Relay Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W.
4 I/O interface 6 general purpose I/Os. Each I/O can be configured either as an input or 12mA LED driver output
5 Line Output Balanced 600 ohm audio line out. Suitable for e.g. external induction loop amplifier
6 Power Input Optional 24VDC power input from external power supply
7 Network Port 10/100/1000Mbps RJ-45 port connecting to Ethernet. PoE/PoE+ is supported.
Retrieved from "https://wiki.zenitel.com/w/index.php?title=VR3G-1_and_VR3G-1P_Board_Connectors&oldid=233671"