Difference between revisions of "DISCON ST"
From Zenitel Wiki
| Line 9: | Line 9: | ||
|colspan="3"|''Disconnect'' | |colspan="3"|''Disconnect'' | ||
|- | |- | ||
| − | |1||NET_OBJ_REF | + | |1||NET_OBJ_REF {ECL_STATION}||colspan="3"|Station to disconnect |
|- | |- | ||
|2||[[UINT1]]<br\>(Optional)||colspan="3"|Disconnect tone: <br\> 0: No tone (default) <br\> 1: Disconnection tone <br\> 2: success tone <br\> 3: failure tone | |2||[[UINT1]]<br\>(Optional)||colspan="3"|Disconnect tone: <br\> 0: No tone (default) <br\> 1: Disconnection tone <br\> 2: success tone <br\> 3: failure tone | ||
Revision as of 15:10, 11 June 2007
| DISCON_ST | 0x008E | 142 | AMC 08.20 | |
|---|---|---|---|---|
| $DISCON_ST L101 2 | Disconnect | |||
| 1 | NET_OBJ_REF {ECL_STATION} | Station to disconnect | ||
| 2 | UINT1<br\>(Optional) | Disconnect tone: <br\> 0: No tone (default) <br\> 1: Disconnection tone <br\> 2: success tone <br\> 3: failure tone | ||
| Response: | COMMAND_RESPONSE is returned. Status = 0 if station already Idle, Status = 1 if some activity was disconnected. Parameter is physical number.<br\> COMMAND_RESPONSE is returned after the disconnection tone (if any). | |||