Difference between revisions of "TFIE Restore Factory Defaults"
From Zenitel Wiki
(→Reset to Factory Default Settings with Activated DHCP) |
(→Reset to Factory Default Settings with Static IP) |
||
Line 22: | Line 22: | ||
= Reset to Factory Default Settings with Static IP = | = Reset to Factory Default Settings with Static IP = | ||
[[File:TFIE Factory Default2.png|thumb|130px|Factory Default with Static IP Address]] | [[File:TFIE Factory Default2.png|thumb|130px|Factory Default with Static IP Address]] | ||
− | |||
− | |||
To reset: | To reset: |
Latest revision as of 11:23, 24 October 2023
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
Reset to Factory Default Settings with Activated DHCP
To reset:
- 1. While pressing any button, power up the station by connecting to a PoE switch.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 5 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
- Username: admin
- Password: alphaadmin
Reset to Factory Default Settings with Static IP
To reset:
- 1. While pressing any button, power up the station by connecting to a PoE switch.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 3 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button to make the station say its IP address.
Factory default values
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin