Difference between revisions of "Permanent Audio Stream"
From Zenitel Wiki
| Line 4: | Line 4: | ||
The configuration page for PAS is not available from the web interface of the device. To access the PAS Settings use the following url: <ipaddress>/goform/'''zForm_stream_config''' | The configuration page for PAS is not available from the web interface of the device. To access the PAS Settings use the following url: <ipaddress>/goform/'''zForm_stream_config''' | ||
| − | + | Optional settings: | |
| − | + | * Configure the PAS to transmit RTP audio only during a call. | |
| − | + | * Configure the PAS to transmit RTP audio only when the call is initiated from a specific DAK key. | |
[[File:PAS2.PNG|thumb|500px|left|Permanent Audio configuration page]] | [[File:PAS2.PNG|thumb|500px|left|Permanent Audio configuration page]] | ||
Revision as of 13:09, 27 September 2024
Permanent Audio Stream (PAS) is a feature in Zenitel Devices enabling transmission of RTP audio streams outside a call. Devices can be configured to permanently transmit up to two RTP streams (configurable). The RTP audio will be sent to a given IP address/port with configured codec.
The configuration page for PAS is not available from the web interface of the device. To access the PAS Settings use the following url: <ipaddress>/goform/zForm_stream_config
Optional settings:
- Configure the PAS to transmit RTP audio only during a call.
- Configure the PAS to transmit RTP audio only when the call is initiated from a specific DAK key.
Tools like VS-Recorder 2.0 can be used to record the actual RTP audio.
|
In Turbine Video stations the Permanent audio stream is removed on TCIV from sw 4.11, but available on TCIV+ |