Difference between revisions of "DIP"
From Zenitel Wiki
| Line 3: | Line 3: | ||
DIP is short for "Display-data over IP", and refers to the ASLT display data protocol. This protocol was based on 9600 baud one-way transmission while DIP is transmitted both ways over IP (TCP and UDP). | DIP is short for "Display-data over IP", and refers to the ASLT display data protocol. This protocol was based on 9600 baud one-way transmission while DIP is transmitted both ways over IP (TCP and UDP). | ||
| + | See also ACDP message: [[DIP FWD]] | ||
[[Category: IP Stations]] | [[Category: IP Stations]] | ||
[[Category:AlphaCom E Software]] | [[Category:AlphaCom E Software]] | ||
Revision as of 14:39, 24 May 2011
DIP is the control protocol used between STENTOFON IP stations and AlphaCom E exchanges. It is used for all data-communication with the IP stations, such as call control, LED settings and display text to the station, and key presses and inputs from the station.
DIP is short for "Display-data over IP", and refers to the ASLT display data protocol. This protocol was based on 9600 baud one-way transmission while DIP is transmitted both ways over IP (TCP and UDP).
See also ACDP message: DIP FWD