Difference between revisions of "PNCI - Public Telephone Interface"
From Zenitel Wiki
| Line 2: | Line 2: | ||
[[image:PNCI Public Telephone Interface.jpg|thumb|150px|PNCI - Public Telephone Interface]] | [[image:PNCI Public Telephone Interface.jpg|thumb|150px|PNCI - Public Telephone Interface]] | ||
| + | == Features == | ||
| + | * Incoming and outgoing calls between intercom and public/private telephone network, or on dial-up tie-line between two intercom exchanges. | ||
| + | * Two-wire analogue interface (loop start). | ||
| + | * From touch-tone telephones, intercom functions such as group call and voice mail are available. | ||
| + | * Selective dialling to any intercom station, or direct dialling to switchboard intercom. | ||
| + | * Tone or voice message prompt for telephone callers using selective dialling. | ||
| + | * With data signalling, five levels of access are programmable for each intercom station. | ||
| + | * Ring signal to PNCI can activate light or buzzer. | ||
| + | * 100 short numbers for speed dialling. | ||
| + | * Housed for wall mounting. | ||
| + | |||
| + | == Description == | ||
| + | Each Public Network Connection Interface (PNCI) unit allows | ||
| + | one conversation at a time. Up to 32 units can be connected | ||
| + | to one intercom exchange. | ||
| + | The audio interface requires a normal subscriber connection | ||
| + | in the intercom exchange. E-wire or data signalling is available: | ||
| + | data signalling enables functions specific to each intercom | ||
| + | subscriber. | ||
| + | If power to the PNCI unit or intercom exchange is switched | ||
| + | off, a bypass relay can connect the incoming line to a | ||
| + | standby telephone. | ||
| + | The PNCI is available in different versions for the following | ||
| + | countries: | ||
| + | Norway/General 100 9400 100 | ||
| + | Sweden 100 9400 110 | ||
| + | Finland 100 9400 120 | ||
| + | Denmark 100 9400 130 | ||
| + | Germany 100 9400 140 | ||
| + | (50 94 00 14) | ||
| + | Switzerland 100 9400 210 | ||
| + | Austria 100 9400 240 | ||
[[Category:TouchLine]] | [[Category:TouchLine]] | ||
[[Category:AlphaCom E System]] | [[Category:AlphaCom E System]] | ||
Revision as of 11:56, 26 June 2007
Features
- Incoming and outgoing calls between intercom and public/private telephone network, or on dial-up tie-line between two intercom exchanges.
- Two-wire analogue interface (loop start).
- From touch-tone telephones, intercom functions such as group call and voice mail are available.
- Selective dialling to any intercom station, or direct dialling to switchboard intercom.
- Tone or voice message prompt for telephone callers using selective dialling.
- With data signalling, five levels of access are programmable for each intercom station.
- Ring signal to PNCI can activate light or buzzer.
- 100 short numbers for speed dialling.
- Housed for wall mounting.
Description
Each Public Network Connection Interface (PNCI) unit allows one conversation at a time. Up to 32 units can be connected to one intercom exchange. The audio interface requires a normal subscriber connection in the intercom exchange. E-wire or data signalling is available: data signalling enables functions specific to each intercom subscriber. If power to the PNCI unit or intercom exchange is switched off, a bypass relay can connect the incoming line to a standby telephone. The PNCI is available in different versions for the following countries: Norway/General 100 9400 100 Sweden 100 9400 110 Finland 100 9400 120 Denmark 100 9400 130 Germany 100 9400 140 (50 94 00 14) Switzerland 100 9400 210 Austria 100 9400 240