Difference between revisions of "Tamper Resistant Substation - 1070601010"
From Zenitel Wiki
Line 1: | Line 1: | ||
− | [[image:Tamper Resistant Substation 107 0601 010.jpg|thumb| | + | [[image:Tamper Resistant Substation 107 0601 010.jpg|thumb|150px|]] |
== Features == | == Features == | ||
* Extremely rugged 1/4" machined metal front plate. Large call-in button for instant contact. | * Extremely rugged 1/4" machined metal front plate. Large call-in button for instant contact. |
Revision as of 08:45, 29 June 2007
Contents
Features
- Extremely rugged 1/4" machined metal front plate. Large call-in button for instant contact.
- No-penetration speaker grille. Protected microphone and amplifier.
- Red “microphone open” LED.
- Built-in 45 Ohm loudspeaker.
- Excellent sensitivity and voice reproduction.
- Adjustable microphone sensitivity
- Screw terminals for easy connection of installation cables.
- Freely programmable extension numbers or features.
- Securely fastened
Description
This Tamper-Resistant Substation has an extremely rugged metal front plate of anodized, brushed aluminium. The substation has a unique design to protect the loudspeaker, microphone, LED indicator and internal electronics from external abuse.
The station flush-mounts on a back box. The metal front plate can be securely fastened to the box with 4mm tamper-resistant screws (provided) or pop rivets.
Fast call initiation is possible with the call-in button. Call-in can be programmed to call any extension number or feature - including Emergency Calls, All Calls - or call queuing to a Stentofon Control Room Master (CRM), MLH, or Call Handler System.
The station has a built-in 45 Ohm loudspeaker. With a potentiometer located inside the casing, it is possible to adjust the microphone sensitivity according to the environmental conditions. The station has screw terminals with labels ensuring easy installation.
Installation
Wiring