Difference between revisions of "Program station volume feature"
From Zenitel Wiki
| Line 15: | Line 15: | ||
The [[ASLT]] output level can also be set from the Users & Stations menu in [[AlphaPro]]. The relation between the 783 volume setting and AlphaPro setting is as follows: | The [[ASLT]] output level can also be set from the Users & Stations menu in [[AlphaPro]]. The relation between the 783 volume setting and AlphaPro setting is as follows: | ||
| − | AlphaPro 783+n | + | AlphaPro 783+n IP-station |
| − | -------- ----- | + | -------- ----- ---------- |
| − | -14 0 | + | -14 0 1 |
-12 | -12 | ||
| − | -10 | + | -10 2 |
| − | -8 1 | + | -8 1 |
| − | -6 | + | -6 3 |
-4 2 | -4 2 | ||
| − | -2 | + | -2 4 |
| − | 0 3 | + | 0 3 |
| − | 2 4 | + | 2 4 5 |
4 5 | 4 5 | ||
| − | 6 6 | + | 6 6 6 |
8 7 | 8 7 | ||
| − | 10 | + | 10 7 |
12 8 | 12 8 | ||
| − | 14 | + | 14 8 |
16 9 | 16 9 | ||
Revision as of 12:25, 24 February 2010
| Feature: | Set station volume |
| Default directory number: | 783 |
| Feature number: | 38 |
| Parameter 1: | 0 (N/A) |
| Description: | Set output level (0-9) on ASLT line board. Primarily to compensate for long wires. Dial: 783 + digit 0-9. Default level is 3. |
The ASLT output level can also be set from the Users & Stations menu in AlphaPro. The relation between the 783 volume setting and AlphaPro setting is as follows:
AlphaPro 783+n IP-station -------- ----- ---------- -14 0 1 -12 -10 2 -8 1 -6 3 -4 2 -2 4 0 3 2 4 5 4 5 6 6 6 8 7 10 7 12 8 14 8 16 9
Related AlphaCom Data Protocol message: VOL