Call Transfer: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
|- | |- | ||
|width="170pt"|'''Feature''': | |width="170pt"|'''Feature''': | ||
| Inquiry call | | Inquiry call or Direct transfer | ||
|- | |- | ||
|'''Default directory number''': || 2 - During conversation | |'''Default directory number''': || 2 - During conversation | ||
| Line 8: | Line 8: | ||
|'''Feature number''': || 55 | |'''Feature number''': || 55 | ||
|-valign="top" | |-valign="top" | ||
|'''Parameter 1''': || 0 | |'''Parameter 1''': || 0 = Inquiry <br\> 1 = Direct transfer (From 1043) | ||
|-valign="top" | |-valign="top" | ||
|'''Description''': || Put the current conversation on hold, and call the third station. | |'''Description''': || Put the current conversation on hold, and call the third station. Or with parameter 1 = 1 does a direct transfer to a third station or feature. | ||
Procedure during conversation: | Procedure during conversation (Inquiry): | ||
*Press 2 to put the station on hold, the station on hold will receive a busy signal | *Press 2 to put the station on hold, the station on hold will receive a busy signal | ||
*Dial the directory number of the third station and establish a second conversation | *Dial the directory number of the third station and establish a second conversation | ||
*Press digit 2 again you can switch between the two conversations (Brokers function) | *Press digit 2 again you can switch between the two conversations (Brokers function) | ||
*Press [[Call Transfer feature|digit 3]] to transfer the call and disconnect yourself, or alternatively, press C-key to cancel the first conversation, then C-key again to cancel the second conversation | *Press [[Call Transfer feature|digit 3]] to transfer the call and disconnect yourself, or alternatively, press C-key to cancel the first conversation, then C-key again to cancel the second conversation | ||
Procedure during conversation (Direct Transfer): | |||
*Press 2 to put the station on hold, the station on hold will receive a busy signal | |||
*Dial the directory number of the third station or an idle feature code. | |||
*Station on hold will connect to the feature dialed and disconnect yourself. | |||
|} | |} | ||
[[AlphaCom Feature List|Back to feature list]] | [[AlphaCom Feature List|Back to feature list]] | ||
Revision as of 13:29, 23 July 2008
| Feature: | Inquiry call or Direct transfer |
| Default directory number: | 2 - During conversation |
| Feature number: | 55 |
| Parameter 1: | 0 = Inquiry <br\> 1 = Direct transfer (From 1043) |
| Description: | Put the current conversation on hold, and call the third station. Or with parameter 1 = 1 does a direct transfer to a third station or feature.
Procedure during conversation (Inquiry):
Procedure during conversation (Direct Transfer):
|