Difference between revisions of "Simplex conversation (Event Handler)"
From Zenitel Wiki
(→Programming) |
|||
Line 16: | Line 16: | ||
* Action: PAUSE | * Action: PAUSE | ||
:$M L%2.DIR | :$M L%2.DIR | ||
+ | |||
+ | [[Image:Simplex Conversation_Programming.jpg|right|250px|thumb]] | ||
+ | |||
+ | Create a second event for the same master station by pressing the “+” button again. Select: | ||
+ | * Event type: 08 - Conversation Outgoing | ||
+ | * When Change to: OFF | ||
+ | * When Related To: All | ||
+ | * Action: $MREL L%2.DIR |
Revision as of 10:10, 9 August 2007
General
This document describes how you can override the voice-operated duplex (VOX), and have a fixed speech direction. Two applications are described.<br\> The first one describes how calls from a master station can be programmed to have initial speech direction from the called station towards the master station.<br\> The second one describes how the whole exchange can be set in permanent simplex mode.<br\> Software requirement: AMC 08.20 or newer.
Initial Speech Direction B to A
When a master station calls a substation it is often required that the conversation should have a fixed speech direction from the substation towards the master station.<br\> By using the AlphaCom Event Handler, it is possible to force the M-key on the B-subscriber ON when the conversation starts, and release the M-key when the conversation cancels. This will force the initial speech direction to be from the substation towards the master station. By operating the M-key, the master can override the speech direction. (In AlphaCom, the last one who is pressing the M-key will get the speech direction). If the master makes a short M-key press the conversation will turn to voice switched duplex.
Programming
From AlphaPro main menu, press the Users & Stations button. Select the master station from the list box, and press the Events button. Create a new event by pressing the “+” button. Select:
- Event type: 08 - Conversation Outgoing
- When Change to: ON
- When Related To: All
- Action: PAUSE
- $M L%2.DIR
Create a second event for the same master station by pressing the “+” button again. Select:
- Event type: 08 - Conversation Outgoing
- When Change to: OFF
- When Related To: All
- Action: $MREL L%2.DIR