Difference between revisions of "Ascom IP-DECT"
From Zenitel Wiki
| Line 1: | Line 1: | ||
This article describes how to setup the SIP based Ascom IP-DECT to work to with the AlphaCom E. | This article describes how to setup the SIP based Ascom IP-DECT to work to with the AlphaCom E. | ||
| − | [[Image:Ascom configuration example.jpg|thumb|Configuration example]] | + | [[Image:Ascom configuration example.jpg|thumb|left|Configuration example]] |
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 20:26, 25 September 2007
This article describes how to setup the SIP based Ascom IP-DECT to work to with the AlphaCom E.
Configuration of Ascom IP-DECT
Load factory default by pressing the reset button through the hole at the rear for 10 sec.
The Ethernet port is by default set to automatically obtain an IP address (DHCP). In your browser, enter ipbs-xx-xx-xx, where xxxxx is the last six digits of the MAC address found at the rear of the IP Dect unit.
192.168.0.1
