|
|
Line 1: |
Line 1: |
− | [[Image:IP substation connections.jpg|280px|right|IP Substation Connections]] | + | #REDIRECT [[Weather and Vandal Resistant IP Substation - 1008041100]] |
− | == Station LED (on board and in front plate) ==
| |
− | '''Blinking at 1 second interval''': Station does not have connection to the AlphaCom E exchange. <br>
| |
− | ''Possible reasons'':
| |
− | * No connection to Ethernet
| |
− | * Wrong AlphaCom E IP address configured
| |
− | * Invalid IP address
| |
− | * No or wrong gateway to the AlphaCom E exchange
| |
− |
| |
− | '''Blinking at 5 seconds interval''': Station has connection to the AlphaCom E exchange, but has not been registered. <br>
| |
− | ''Reason'':
| |
− | * Station has not been programmed in AlphaPro
| |
− | | |
− | '''No blinking'''<br>
| |
− | ''Possible reasons'':
| |
− | * Station connected and registered to the AlphaCom E exchange - All OK
| |
− | * Station not powered up (if no other LEDs are active)
| |
− | | |
− | == Status LED ==
| |
− | * '''Blinking 2 red + 1 green''': Station does not have connection to the AlphaCom E exchange
| |
− | * '''Blinking 1 red + 2 green''':Station has connection to AlphaCom E exchange, but has not been registered
| |
− | * '''Blinking 3 green''': Station connected and registered in the AlphaCom E exchange
| |
− | | |
− | == LAN LEDs (on LAN and AUX RJ45-jacks) ==
| |
− | '''Left green LED''':
| |
− | * Steady light: Ethernet connection OK
| |
− | * Blinking: Ethernet traffic
| |
− | * No light: No Ethernet connection
| |
− | '''Right amber LED''':
| |
− | * Light: 100 Mbit Ethernet connection
| |
− | * No light: 10 Mbit Ethernet connection
| |
− | | |
− | [[Category: Stations]]
| |
− | [[Category: IP Stations]]
| |