Actions

Difference between revisions of "CDC STATE"

From Zenitel Wiki

Line 9: Line 9:
 
|-
 
|-
 
|colspan="5"|Message used for billing control, from AMCD to ABSD <br\>
 
|colspan="5"|Message used for billing control, from AMCD to ABSD <br\>
CDC = Call Detail Control  
+
CDC = Call Detail Control. Response is [[CDC_CMD]].
 
|-
 
|-
 
|align=center|1||[[UINT2]]||colspan="3"|Connection Reference for this "dialing" sequence (actually ST_IND of A-station)
 
|align=center|1||[[UINT2]]||colspan="3"|Connection Reference for this "dialing" sequence (actually ST_IND of A-station)

Revision as of 11:49, 10 June 2008

Related to ABSD_Billing

CDC_STATE 0x00xx xx AMC 10.40
Message used for billing control, from AMCD to ABSD <br\>

CDC = Call Detail Control. Response is CDC_CMD.

1 UINT2 Connection Reference for this "dialing" sequence (actually ST_IND of A-station)
2 NET_OBJ_REF A-station (billed station), in NRF_LOCAL_DIRNO format.
3 UINT1 State of billing sequence.<br\>

1 START, user has initiated a feature requiring CDC (5 = feature dirno)<br\> 2 DIGIT, user has dial a digit (5 = digit netref) <br\> 3 ESTABLISHED, (SIP)connection established (200 OK received)<br\> 4 ACTIVE, call is still active, will come every 10 second during connection<br\> 5 DISCONNECT, CDC sequence ended, ABSD to release call.

4 NET_OBJ_REF Netref related to state type, (Feature, B-station or digit)

Back to AlphaNet message list