Difference between revisions of "Billing Installation Guide"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| + | {{NotReleased}} | ||
If you are running on the new file system (AMC Board Support Package Version 10.00), then you can just upgrade with the billing package 1.00 (alpha_billing_01_00.tbz2). | If you are running on the new file system (AMC Board Support Package Version 10.00), then you can just upgrade with the billing package 1.00 (alpha_billing_01_00.tbz2). | ||
To install new file system on the Alphacom, follow the instructions below: | To install new file system on the Alphacom, follow the instructions below: | ||
Revision as of 16:32, 24 February 2009
| This AlphaCom feature is under development and is not yet released! |
|---|
If you are running on the new file system (AMC Board Support Package Version 10.00), then you can just upgrade with the billing package 1.00 (alpha_billing_01_00.tbz2). To install new file system on the Alphacom, follow the instructions below:
1. Install "Alphacom Image Upgrade" application on your computer (Requires .NET Framework 3.0)
2. Copy the image "alpha_uimage_20_billing.bin" (or desired image) to Server root catalog selected while installing the program (for example: C:\Program Files\STENTOFON\AlphaImageUpgrade\ServerRoot)
3. Install the Alphasyspackage "alpha_sys_10_52.tbz2" (In order to install this package, alpha_sys_10_51.tbz2 should be already installed)
4. If it exist newer Billing package version you want to install, do it before configuring the billing system. (alpha_billing_01_10.tbz2 is the latest release by 01.03.2009)
5. Insert a license key with desired SIP Trunk Lines
6. Enable the Billing Node Exchange under "NET Rounting/AlphaNet Routing/General Settings/Billing Node"
7. Send Changes and reset in the AlphaPro to update database configuration in the Billing Web interface.