Difference between revisions of "IP DECT Base Repeater Wall"
From Zenitel Wiki
(→Programming Software) |
(→Programming Software) |
||
Line 6: | Line 6: | ||
==Programming Software== | ==Programming Software== | ||
− | The application software for programming the repeater and software downloads to the repeater is called ServiceTool. The ServiceTool application is available as a download | + | The application software for programming the repeater and software downloads to the repeater is called ServiceTool. The ServiceTool application is available as a download [[Downloads|here]]. |
==Specifications== | ==Specifications== |
Revision as of 14:54, 14 September 2009
Description
The repeater can be used to extend the coverage area in a wireless radio synchronization solution, where it serves as a receiver and transmitter in relaying radio signals. Depending on the repeater type it can be mounted either on the wall or on the ceiling. the wireless repeater is used in areas with limited voice traffic, where cabling is difficult. The repeater does not increase the number of traffic channels, but increases the coverage area established with the base station. Up to three repeaters can be placed in cascade formation directing coverage in a certain direction. If the radio environment is difficult , one should avoid installing repeaters.
Programming Software
The application software for programming the repeater and software downloads to the repeater is called ServiceTool. The ServiceTool application is available as a download here.
Specifications
Radio Coverage area:
Up to 150 meters outdoors
Maximum number of simultaneous calls:
4
Power supply:
External power supply, item number 221 105 0200
Size (WxHxD):
100 x 100 x 38mm
Weight:
0.12kg