Difference between revisions of "1-3d. IP Stations – SIP Station X-Lite (solution)"
From Zenitel Wiki
Line 1: | Line 1: | ||
[[File:1-3d config.PNG|left|thumb|500px|System configuration]] | [[File:1-3d config.PNG|left|thumb|500px|System configuration]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | |||
− | |||
+ | __NOTOC__ | ||
+ | === Install and configure the SoftClient === | ||
+ | * Download the file '''SoftClientSetup.msi''' from e.g. [[Downloads#SoftClient|AlphaWiki]] or from Partnernet, and install it on the PC | ||
+ | * Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0 | ||
+ | * Start the SoftClient, and select '''File''' -> '''Preferences''', and set these parameters: | ||
+ | [[File:1-3c solution1.PNG|thumb|left|250px|SoftClient: File -> Preferences window]] | ||
+ | <br style="clear:both;" /> | ||
+ | * '''Save Settings''' | ||
+ | * Select '''Configure Audio Device''' to adjust speaker and microphone levels | ||
+ | |||
+ | ===Configure the AlphaCom XE=== | ||
+ | *In AlphaPro go to '''Users & Stations''', and select physical number 40; 140 Station 40 | ||
+ | *Use the section on the right and change the configuration as follows: | ||
+ | [[File:1-3c solution2.PNG|thumb|left|400px|AlphaPro: Users & Stations window]] | ||
+ | <br style="clear:both;" /> | ||
+ | |||
+ | * Send the changes to the AlphaCom XE | ||
+ | [[File:SendChg.PNG|400px]] | ||
+ | |||
+ | === Troubleshooting === | ||
+ | * If the X-Lite does not register, check the following: | ||
+ | ** In AlphaWeb, System Configuration -> Filters, verify that ports for '''SIP''' and '''VoIP Audio''' are enabled | ||
+ | ** In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations | ||
<br><br><br><br> | <br><br><br><br> | ||
Revision as of 17:51, 22 March 2011
Install and configure the SoftClient
- Download the file SoftClientSetup.msi from e.g. AlphaWiki or from Partnernet, and install it on the PC
- Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
- Start the SoftClient, and select File -> Preferences, and set these parameters:
- Save Settings
- Select Configure Audio Device to adjust speaker and microphone levels
Configure the AlphaCom XE
- In AlphaPro go to Users & Stations, and select physical number 40; 140 Station 40
- Use the section on the right and change the configuration as follows:
- Send the changes to the AlphaCom XE
Troubleshooting
- If the X-Lite does not register, check the following:
- In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
- In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations