Difference between revisions of "PrisCom station - Configuration"

Revision as of 15:45, 10 December 2012

This article is a stub. You can help AlphaWiki by expanding it.

Minimun software requirements

AMC software v.9.09 or later
AlphaPro 9.21 or later

Start point options

The station properties are programmed from AlphaPro

Basic features: Start with a new AlphaPro database and fill in all parameters from scratch
Advanced features: Use a preprogrammed AlphaPro database.

Basic feature programming

The 7061 and 7063 uses “Two tone DAK signaling", not regular DAK signaling

In Users & Stations -> User Preferences set DAK signaling to "(3) Two tone signaling w/ack“
In Users & Stations -> DAK assign numbers to the panel buttons:
- DAK 2 = Call button
- DAK 3 = Program button (not available on the 100 7061 000)

Advanced feature programming

Copy the PrisCom database to the AlphaPro Database folder Start AlphaPro and select the PrisCom database

Guard station configuration

In Users & Stations -> UDP, include the station in UDP 1
In Users & Stations -> Group, include the station in a “Guard group”. This is required even with a single guard station

Prison station configuration

In Users & Stations -> UDP, include the station in UDP 2, and enter the “Guard group” index number in the Used Defined Parameter field. This is the target for calls from this station.

Notes on DAK programming:

No DAK programming is required
The event handler programming in the PrisCom database will automatically set “Two tone DAK signaling”, and program the DAK’s to point to physical station 500 and 501
Physical station 500 and 501 is preconfigured with CellStation DAK keys

@@ Line 16: / Line 16: @@
 The 7061 and 7063 uses “Two tone DAK signaling", not regular DAK signaling
 *In '''Users & Stations''' -> '''User Preferences''' set DAK signaling to "(3) Two tone signaling w/ack“
-In '''Users & Stations''' -> '''DAK''' assign numbers to the panel buttons:
+* In '''Users & Stations''' -> '''DAK''' assign numbers to the panel buttons:
-DAK 2 = Call button
+**DAK 2 = Call button
-DAK 3 = Program button (not available on the 100 7061 000)
+**DAK 3 = Program button (not available on the 100 7061 000)
+==Advanced feature programming==
 Copy the PrisCom database to the AlphaPro Database folder
 Start AlphaPro and select the PrisCom database
-Guard station configuration:
-In Users & Stations -> UDP, include the station in UDP 1
+===Guard station configuration===
-In Users & Stations -> Group, include the station in a “Guard group”. This is required even with a single guard station
+*In Users & Stations -> UDP, include the station in UDP 1
-Prison station configuration:
+*In Users & Stations -> Group, include the station in a “Guard group”. This is required even with a single guard station
-In Users & Stations -> UDP, include the station in UDP 2, and enter the “Guard group” index number in the Used Defined Parameter field. This is the target for calls from this station.
+===Prison station configuration===
+*In Users & Stations -> UDP, include the station in UDP 2, and enter the “Guard group” index number in the Used Defined Parameter field. This is the target for calls from this station.
 Notes on DAK programming:
-No DAK programming is required
+*No DAK programming is required
-The event handler programming in the PrisCom database will automatically set “Two tone DAK signaling”, and program the DAK’s to point to physical station 500 and 501
+*The event handler programming in the PrisCom database will automatically set “Two tone DAK signaling”, and program the DAK’s to point to physical station 500 and 501
-Physical station 500 and 501 is preconfigured with CellStation DAK keys
+*Physical station 500 and 501 is preconfigured with CellStation DAK keys