Difference between revisions of "2-2c. CCTV with data (1) - Event Handler (practice)"
From Zenitel Wiki
| Line 1: | Line 1: | ||
[[File:2-2c exercise.PNG]] | [[File:2-2c exercise.PNG]] | ||
| − | Station numbers & names: | + | '''Station numbers & names:''' |
* 101: Entrance | * 101: Entrance | ||
*102: Gate 1 | *102: Gate 1 | ||
| Line 8: | Line 8: | ||
*202: Guard 2 | *202: Guard 2 | ||
| − | CCTV Control: | + | '''CCTV Control:''' |
*The Entrance makes a Call Request to Guard 1. Gate 1 & 2 make a Call Request to Guard 2 | *The Entrance makes a Call Request to Guard 1. Gate 1 & 2 make a Call Request to Guard 2 | ||
*When a Call Request is activated the Video Switch should receive ASCII characters telling which camera to connect to which monitor. The output should be on the format: “CxMy CR LF”. (Example: C3M2CRLF, Connect camera 3 to monitor 2, CR=Carriage Return, LF=Line Feed. Use Hyper Terminal to verify) | *When a Call Request is activated the Video Switch should receive ASCII characters telling which camera to connect to which monitor. The output should be on the format: “CxMy CR LF”. (Example: C3M2CRLF, Connect camera 3 to monitor 2, CR=Carriage Return, LF=Line Feed. Use Hyper Terminal to verify) | ||
Revision as of 08:49, 17 September 2013
Station numbers & names:
- 101: Entrance
- 102: Gate 1
- 103: Gate 2
- 201: Guard 1
- 202: Guard 2
CCTV Control:
- The Entrance makes a Call Request to Guard 1. Gate 1 & 2 make a Call Request to Guard 2
- When a Call Request is activated the Video Switch should receive ASCII characters telling which camera to connect to which monitor. The output should be on the format: “CxMy CR LF”. (Example: C3M2CRLF, Connect camera 3 to monitor 2, CR=Carriage Return, LF=Line Feed. Use Hyper Terminal to verify)