Difference between revisions of "2-2b. CCTV with relay - Event Handler (solution)"
From Zenitel Wiki
(→Solution) |
|||
Line 3: | Line 3: | ||
=== Solution === | === Solution === | ||
− | ''' | + | '''Call buttons''': |
* ''Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard.'' | * ''Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard.'' | ||
Line 18: | Line 18: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | * ''A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation | + | '''Relay control''': |
+ | * ''A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation. Use the outputs 5 and 6.'' | ||
* ''The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).'' | * ''The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).'' | ||
Revision as of 16:14, 27 February 2013
Solution
Call buttons:
- Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard.
]]
Relay control:
- A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation. Use the outputs 5 and 6.
- The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).