Actions

Difference between revisions of "TFIE Dimensions & Mounting Instructions"

From Zenitel Wiki

(Opening the enclosure)
(Opening the enclosure)
Line 22: Line 22:
  
 
=Opening the enclosure=
 
=Opening the enclosure=
 +
Loosen the 2 screws securing the front frame to the on-wall box:
 
[[File:TFIE opening 1.PNG|thumb|left|200px]]
 
[[File:TFIE opening 1.PNG|thumb|left|200px]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
Loosen the 2 screws securing the front frame to the on-wall box.
+
 
-----
+
Open the enclosure by pulling the front frame out 5 mm, keeping it parallel to the on-wall box. This is necessary to get clearing for the hinges:
 
[[File:TFIE opening 2.PNG|thumb|left|200px]]
 
[[File:TFIE opening 2.PNG|thumb|left|200px]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
Open the enclosure by pulling the front frame out 5 mm, keeping it parallel to the on-wall box. This is necessary to get clearing for the hinges.
+
 
-----
+
Pull the right side of the front frame to fully open the enclosure. Do NOT open the enclosure to the extent that cables between the front and back parts are pulled tight:
 
[[File:TFIE opening 3.PNG|thumb|left|300px]]
 
[[File:TFIE opening 3.PNG|thumb|left|300px]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
Pull the right side of the front frame to fully open the enclosure. Do NOT open the enclosure to the extent that cables between the front and back parts are pulled tight.
 
-----
 
  
 
=Mounting the unit=
 
=Mounting the unit=

Revision as of 13:11, 13 October 2016

  Dimensions (WxHxD) Weight
TFIE-x 346 x 178 x 101 mm 1.9 kg
TFIX-x 346 x 178 x 101 mm 1.9 kg
TKIE-x 65 x 100 x 25 mm 0.1 kg


TFIE/TFIX Extended Station Dimensions

TFIE Extended Station - Front view
TFIE Extended Station - Side view
TFIE Extended Station - Rear view
TFIE Extended Station - Bottom view


Opening the enclosure

Loosen the 2 screws securing the front frame to the on-wall box:

TFIE opening 1.PNG


Open the enclosure by pulling the front frame out 5 mm, keeping it parallel to the on-wall box. This is necessary to get clearing for the hinges:

TFIE opening 2.PNG


Pull the right side of the front frame to fully open the enclosure. Do NOT open the enclosure to the extent that cables between the front and back parts are pulled tight:

TFIE opening 3.PNG


Mounting the unit