Difference between revisions of "Voice Paging from IP Substation"
From Zenitel Wiki
(Created page with "Scenario: A group of IP Substation should be able to do voice paging to a group of speakers by simply pressing the call key, speaking and releasing when finished. ==Create the r...") |
|||
| Line 1: | Line 1: | ||
Scenario: | Scenario: | ||
| − | A group of IP | + | A group of IP Substations should be able to do voice paging to a group of speakers by simply pressing the call key, speaking and releasing when finished. |
==Create the receiver group== | ==Create the receiver group== | ||
Revision as of 10:03, 16 April 2015
Scenario: A group of IP Substations should be able to do voice paging to a group of speakers by simply pressing the call key, speaking and releasing when finished.
Create the receiver group
In AlphaPro Groups->Local groups select the group you want to use and press change. Give the group an appropriate name and set gong type to No Gong:
Select the Members tab and move the receivers to the Members list:
UDP Membership
Put all IP Substation that should be able to do Voice Paging in a common UDP group:
Event Handler
Use the event handler (Exhcange&System->Events) to create this event:
Action string is: IF %chg(1,0) $DD L%1.dir L85 $M L%1.dir STOP ENDIF $MREL L%1.dir $C L%1.dir