Difference between revisions of "Flowire Software Upgrade Procedure"
From Zenitel Wiki
(Created page with "This is a step by step guide to upgrading the software in Flowire through the serial interface. == Requirements == * Windows PC * TFTPS server, for example Tftpd32 or Tftpd64 b...") |
|||
| Line 10: | Line 10: | ||
* Flowire unit | * Flowire unit | ||
* Flowire power supply | * Flowire power supply | ||
| + | |||
| + | == Create the special USB-Serial cable == | ||
| + | * You need an RS232 cable with 3,3V TTL level. For example: http://au.element14.com/ftdi/ttl-232r-3v3/connector-type-a/dp/1329311 | ||
| + | * Create an adapter cable to connect to the debug connector on Flowire: | ||
Revision as of 13:02, 17 April 2015
This is a step by step guide to upgrading the software in Flowire through the serial interface.
Requirements
- Windows PC
- TFTPS server, for example Tftpd32 or Tftpd64 by Ph. Jounin (http://tftpd32.jounin.net)
- Telnet software, for example PuTTY by Simon Tatham (http://www.chiark.greenend.org.uk/~sgtatham/putty/)
- Simple network switch
- 2 Ethernet cables
- Special USB-Serial cable with JTAG connector
- Flowire unit
- Flowire power supply
Create the special USB-Serial cable
- You need an RS232 cable with 3,3V TTL level. For example: http://au.element14.com/ftdi/ttl-232r-3v3/connector-type-a/dp/1329311
- Create an adapter cable to connect to the debug connector on Flowire: