TMIS Indication LEDs: Difference between revisions
From Zenitel Wiki
(Created page with "=LEDs on Front Plate= '''Status LEDs''' :- '''Talk icon''' lights '''green''' when a call is active and in conversation :- '''Door icon''' lights '''red''' when the door is un...") |
|||
| Line 1: | Line 1: | ||
=LEDs on Front Plate= | =LEDs on Front Plate= | ||
'''Status LEDs''' | '''Status LEDs''' | ||
:- '''Talk icon''' lights ''' | :- '''Talk icon LED''' lights '''amber''' when a call is active and in conversation | ||
:- '''Door icon''' lights ''' | :- '''Door icon LED''' lights '''green''' when the door is unlocked or relay is active | ||
[[File:TMIS-1 LED icon1.PNG|thumb|300px|left]] | [[File:TMIS-1 LED icon1.PNG|thumb|300px|left]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
'''Talk Icon: Flashing at 1 second intervals''' | '''Talk Icon LED: Flashing at 1 second intervals''' | ||
Station has no connection to the AlphaCom server/exchange. | Station has no connection to the AlphaCom server/exchange. | ||
| Line 20: | Line 20: | ||
'''Talk Icon: Flashing at 5 second intervals''' | '''Talk Icon LED: Flashing at 5 second intervals''' | ||
Station connected but NOT registered in the AlphaCom server/exchange. | Station connected but NOT registered in the AlphaCom server/exchange. | ||
Reason: | Reason: | ||
Revision as of 11:04, 13 October 2016
LEDs on Front Plate
Status LEDs
- - Talk icon LED lights amber when a call is active and in conversation
- - Door icon LED lights green when the door is unlocked or relay is active
Talk Icon LED: Flashing at 1 second intervals
Station has no connection to the AlphaCom server/exchange.
Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom XE IP address configured
- Invalid IP address
- No gateway or wrong gateway to the AlphaCom server/exchange
Talk Icon LED: Flashing at 5 second intervals
Station connected but NOT registered in the AlphaCom server/exchange.
Reason:
- Station has not been programmed in AlphaPro
Status LEDs on PCB
Flashing 2 red + 1 green
- Station has no connection to the AlphaCom server.
Flashing 1 red + 2 green
- Station connected but NOT registered in the AlphaCom server.
Flashing 3 green
- Station connected and registered in the AlphaCom server.
Ethernet Activity & Speed LEDs on PCB
Green LED
- Steady light: Ethernet connection OK
- Flashing: Ethernet data traffic
- No light: No Ethernet connection
Yellow LED
- Steady light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection