INCA Substation LED Indicators: Difference between revisions
From Zenitel Wiki
| Line 1: | Line 1: | ||
== | ===Station LED=== | ||
{| | |||
|[[File:IP Substation Indication 1.PNG|thumb|200px|IP Substation LED]] | |||
|[[File:IP Substation Indication 2.PNG|thumb|200px|IP Substation (3gang) LED]] | |||
|} | |||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
'''Blinking at 1 second intervals:'''<br> | |||
Station has no connection to the AlphaCom XE Audio Server. | |||
Possible reasons: | Possible reasons: | ||
* No connection to Ethernet | |||
* Wrong AlphaCom IP address configured | |||
* Invalid IP address | |||
* No gateway or wrong gateway to the AlphaCom XE Audio Server | |||
'''Blinking at 5 second intervals:'''<br> | |||
Station connected but NOT registered in the AlphaCom XE Audio Server. | |||
Possible reasons: | |||
* Station has not been programmed in AlphaPro | |||
* Missing IP Station license in AlphaCom XE Audio Server | |||
'''No blinking:'''<br> | |||
Possible reasons: | Possible reasons: | ||
* Station connected and registered to the AlphaCom XE Audio Server | |||
* Station not powered up (if no other LEDs are active) | |||
===Status LED=== | |||
Bicolor SMD LED on board component side. | Bicolor SMD LED on board component side. | ||
[[File: | [[File:IPSub Indications 1.png|left|thumb|300px|Status LED]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
'''Blinking 2 red + 1 green:''' <br> | |||
* Station has no connection to the AlphaCom XE Audio Server. | |||
'''Blinking 1 red + 2 green:'''<br> | |||
* Station connected but NOT registered in the AlphaCom XE Audio Server. | |||
'''Blinking 3 green:'''<br> | |||
* Station connected and registered in the AlphaCom XE Audio Server. | |||
===LAN LEDs=== | |||
'''Left LED:'''<br> | |||
[[File:IP Substation Indication 4.PNG|left|thumb|200px|Left LED]] | [[File:IP Substation Indication 4.PNG|left|thumb|200px|Left LED]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
*Steady light: Ethernet connection OK | * Steady light: Ethernet connection OK | ||
*Blinking: Ethernet traffic | * Blinking: Ethernet traffic | ||
*No light: No Ethernet connection | * No light: No Ethernet connection | ||
'''Right LED:'''<br> | |||
[[File:IP Substation Indication 5.PNG|left|thumb|200px|Right LED]] | [[File:IP Substation Indication 5.PNG|left|thumb|200px|Right LED]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
*Light: 100 Mbit Ethernet connection | * Light: 100 Mbit Ethernet connection | ||
*No light: 10 Mbit Ethernet connection | * No light: 10 Mbit Ethernet connection | ||
Revision as of 13:43, 21 October 2016
Station LED
Blinking at 1 second intervals:
Station has no connection to the AlphaCom XE Audio Server.
Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom IP address configured
- Invalid IP address
- No gateway or wrong gateway to the AlphaCom XE Audio Server
Blinking at 5 second intervals:
Station connected but NOT registered in the AlphaCom XE Audio Server.
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in AlphaCom XE Audio Server
No blinking:
Possible reasons:
- Station connected and registered to the AlphaCom XE Audio Server
- Station not powered up (if no other LEDs are active)
Status LED
Bicolor SMD LED on board component side.
Blinking 2 red + 1 green:
- Station has no connection to the AlphaCom XE Audio Server.
Blinking 1 red + 2 green:
- Station connected but NOT registered in the AlphaCom XE Audio Server.
Blinking 3 green:
- Station connected and registered in the AlphaCom XE Audio Server.
LAN LEDs
Left LED:
- Steady light: Ethernet connection OK
- Blinking: Ethernet traffic
- No light: No Ethernet connection
Right LED:
- Light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection