Difference between revisions of "IP Heavy Duty Connections"

Revision as of 12:52, 17 March 2017

The IP Heavy Duty Stations

To access these connectors the frontplate must be removed.

LAN	10/100 Mbps RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line.
AUX	10/100 Mbps RJ-45 ports for auxiliary equipment such as PC and IP camera.
Input/Output	Pluggable screw terminal
Local Power	Plugable screw terminal, 19-27 VDC Idle 4W, max. 8W

The IP Heavy Duty Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.

If PoE is not available, the IP Substation can be connected to a 24 VDC local power supply.

There are four connectors on the IP heavy Duty station PCB: P1-P4.

P3: 6-pin plug-on screw terminal for external connections.
- Pin 1/2: Connection of external 8 ohm loudspeaker (optional).
- Pin 3/4: Internal NO relay contact for additional call indication, etc.
- Pin 5/6: Connect 24VDC power supply if PoE is not used

P4: 6-pin plug-on screw terminal for internal connections.
- Pin 1/4: Input for PTT from headset and restoring Factory Default Setting.
- Pin 2/4: Call button no. 2 or logical input (optional).
- Pin 3/4: Connected to hook-switch (reed-switch)
- Pin 5/6: Station LED for call and message info. (Pin 6 is positive.)

@@ Line 19: / Line 19: @@
 If PoE is not available, the IP Substation can be connected to a 24 VDC local power supply.
-== Network Connection ==
-[[File:IP Substation Main Board 1.PNG|right|300px]]
-There are two RJ45 ports on the IP Heavy Duty stations:
-:* LAN port (P1): for connecting to the network and the AlphaCom XE Audio Server.
-:* AUX port (P2): for connecting to auxiliary equipment such as a PC or IP Camera.
 == Connections ==